The Junos Command Line Interface (CLI) is the primary way to configure, monitor, and troubleshoot Juniper Networks devices.

It is a text-based interface that allows users to enter commands and receive responses from the device. The Junos CLI provides a vast set of commands that can be used to perform a variety of functions, such as configuring interfaces, routing protocols, and security policies.

What is Junos OS?

Junos OS is the operating system that runs on Juniper Networks devices, such as routers, switches, and firewalls. It is a highly modular and scalable system that provides a wide range of features and services. Junos OS is built on a FreeBSD UNIX-based kernel, which gives it a stable and reliable foundation.

What is a Command Line Interface?

A Command Line Interface (CLI) is a text-based interface that allows users to enter commands and receive responses from a device or computer.

The CLI is a powerful tool for configuring and managing devices, as it provides a direct way to interact with the device and execute commands.

The Junos Command Line Interface

The Junos CLI provides a powerful and flexible way to manage Juniper Networks devices. Here are some essential things to know about the Junos CLI:

Accessing the Junos CLI

To access the Junos CLI, you need to establish a console or SSH connection to the device. Once connected, you will be prompted to enter your username and password. After you have logged in, you can start entering commands.

Junos CLI Modes

The Junos CLI has two primary modes: operational mode and configuration mode. In operational mode, you can enter commands to view the current status of the device, such as interface statistics or routing tables.

In configuration mode, you can enter commands to configure the device, such as setting up interfaces or configuring routing protocols.

Junos CLI Commands

The Junos CLI provides a vast set of commands that can be used to perform a wide range of functions. Here are some examples of common commands:

  • show interfaces: Displays information about the device's interfaces.
  • show version: Displays information about the device's hardware and software.
  • show route: Displays information about the device's routing table.
  • set interfaces ge-0/0/0 unit 0 family inet address 192.168.1.1/24: Configures the IP address of interface ge-0/0/0.

Junos CLI Syntax

The syntax of Junos CLI commands is similar to that of other UNIX-based systems. Commands are entered in a hierarchical format, with each level separated by a greater than symbol (>).

For example, to enter configuration mode, you would enter the command "configure" from operational mode.

Junos CLI Help

The Junos CLI provides a built-in help system that can be used to look up commands and their syntax. To access the help system, enter the command "help" followed by the name of the command you want to learn about.

For example, to learn about the show interfaces command, enter "help show interfaces".

Junos CLI Shortcuts

The Junos Command Line Interface (CLI) is a powerful tool for configuring and managing Juniper Networks devices. Here are some shortcuts that can help you navigate the Junos CLI more efficiently:

Basic Navigation

  • Use the "Tab" key to autocomplete commands or provide a list of available options.
  • Use the "Up Arrow" and "Down Arrow" keys to cycle through previous commands entered in the CLI.
  • Use the "Ctrl + A" key combination to move the cursor to the beginning of the current command line.
  • Use the "Ctrl + E" key combination to move the cursor to the end of the current command line.
  • Use the "Ctrl + U" key combination to clear the entire current command line.
  • Use the "Tab" key to autocomplete configuration statements or provide a list of available options.
  • Use the "Ctrl + A" key combination to move the cursor to the beginning of the current line.
  • Use the "Ctrl + E" key combination to move the cursor to the end of the current line.
  • Use the "Ctrl + U" key combination to clear the entire current line.
  • Use the "Ctrl + K" key combination to delete the text from the cursor to the end of the line.

Editing Commands

  • Use the "Ctrl + W" key combination to delete the word to the left of the cursor.
  • Use the "Ctrl + L" key combination to clear the screen and redraw the current prompt.
  • Use the "Ctrl + R" key combination to search backwards through previous commands for a specific string.

Command Output

  • Use the "Space" bar to scroll through the output one page at a time.
  • Use the "Enter" key to scroll through the output one line at a time.
  • Use the "Ctrl + F" key combination to search forward through the output for a specific string.
  • Use the "Ctrl + B" key combination to search backward through the output for a specific string.

By using these shortcuts, you can navigate the Junos CLI more efficiently and save time when configuring and managing Juniper Networks devices.

Common Tasks Using the Junos CLI

The Junos CLI can be used to perform a wide range of tasks on Juniper Networks devices. Here are some common tasks and the commands used to perform them:

Viewing Interface Information

To view information about the device's interfaces, use the "show interfaces" command. This command provides detailed information about the interfaces, including their status, speed, and error statistics.

Configuring Interfaces

To configure an interface, enter configuration mode by typing "configure". Then, enter the command "set interfaces <interface-name> <unit-number> family <address-family> address <IP-address>/<subnet-mask>".

For example, to configure interface ge-0/0/0 with an IP address of 192.168.1.1 and a subnet mask of 255.255.255.0, you would enter the command "set interfaces ge-0/0/0 unit 0 family inet address 192.168.1.1/24".

Configuring Routing Protocols

To configure a routing protocol, enter configuration mode and enter the command "set protocols <protocol-name>".

For example, to configure OSPF, you would enter the command "set protocols ospf". You can then enter additional commands to configure the specific parameters of the protocol.

Displaying Routing Information

To view information about the device's routing table, use the "show route" command. This command displays the device's current routing table, including the routes to different networks and the next hop addresses.

Troubleshooting with the Junos CLI

The Junos CLI provides several tools that can be used to troubleshoot problems on Juniper Networks devices. Here are some examples:

Ping

The "ping" command can be used to test the connectivity to a specific IP address. To use the ping command, enter "ping <IP-address>". For example, to test the connectivity to the IP address 8.8.8.8, you would enter the command "ping 8.8.8.8".

Traceroute

The "traceroute" command can be used to trace the path that packets take from the device to a specific destination.

To use the traceroute command, enter "traceroute <destination>". For example, to trace the path to the IP address 8.8.8.8, you would enter the command "traceroute 8.8.8.8".

Final Thoughts

In conclusion, the Junos Command Line Interface is a powerful tool that allows network administrators to configure, monitor, and troubleshoot Juniper Networks devices.

The Junos CLI provides a vast set of commands that can be used to perform a wide range of functions, from configuring interfaces to troubleshooting connectivity issues. By understanding and mastering the Junos CLI, network administrators can effectively manage their Juniper Networks devices and ensure that their networks are running smoothly.

Tagged in:

Juniper Network